Tuesday, January 6, 2015
China letest hardwear solution
Invalid Charger Solution First Try To Change Charger if not work Remove Or Change Two Black Color Resistor near R22. 100% Tested A Lot Of Set.
Samsung Grand Quattro I8552 Home Key Not Working Tested Solution
Samsung jiti I8552 keypad malfunction solution or a solution
that can answer.
This solution does not work when pressed, to correct certain key that can help as a guide. Device keypad for tomorrow due to pain or water remains liquid due to a short circuit occurs, can stop working and or rust may form, which is very often damaged or solvents.
If this happens you will be using membrane keypad and liquid cleaner to clean the contact pad may need.
The key to clean, but still some key keypad still may not work if the connection is not open, if you trace and then to check solution can be used under or cut-off.
His return home to key Flex try and check its connection (not stick Well)
They still want real path check. Home key problem in the Grand Quattro I8552 Samsung not work the way home button, home key Jumpers ,, Centre key solution.
that can answer.
This solution does not work when pressed, to correct certain key that can help as a guide. Device keypad for tomorrow due to pain or water remains liquid due to a short circuit occurs, can stop working and or rust may form, which is very often damaged or solvents.
If this happens you will be using membrane keypad and liquid cleaner to clean the contact pad may need.
The key to clean, but still some key keypad still may not work if the connection is not open, if you trace and then to check solution can be used under or cut-off.
His return home to key Flex try and check its connection (not stick Well)
They still want real path check. Home key problem in the Grand Quattro I8552 Samsung not work the way home button, home key Jumpers ,, Centre key solution.
Thursday, December 18, 2014
N95 8gb fake charging charging not save solution
N95 8gb fake charging & charging not save.solution.
N95 8gb fake charging charging not save solution
N95 8gb fake charging charging not save solution
Thursday, December 11, 2014
iPhone 4S Front And Back Camera Nor Working Jumper Solution
iPhone 4S Front And Back Camera Nor Working Jumper Hardware Repair Solution
All China Mobiles Secret Codes For All Chinease Models
CHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes 3xx, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motorola:
Motofone F3 software version: **9999* Send
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
ZTE Mobile1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatelE205
unlocking phone code,only press***847# without simcard
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes “Chinese” models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile 3xx, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language
Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and “yes””
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes 3xx, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motorola:
Motofone F3 software version: **9999* Send
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
ZTE Mobile1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatelE205
unlocking phone code,only press***847# without simcard
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes “Chinese” models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile 3xx, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language
Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and “yes””
Sunday, December 7, 2014
How to Install Android 4 0 4 ICS IMM30B On Verizon Galaxy Nexus
It seems that owners of Google devices are the first to get a leaked version of a new update for Android OS. If you use Verizon Galaxy Nexus that is running on Android 4.0.2 this piratical guide will show you how how to flash / install Android 4.0.4 ICS on this device. The tutorial is very short and easy to follow, but make sure you read it trough once before doing it yourself.
What you can get with this update: better user experience and better overall speed, shorter boot time, more radio stations with better signal, switching from 3G to 4G (and the other way around) is now made simple and there are some fixes of the battery bugs.
[Continue Reading ...]
What you can get with this update: better user experience and better overall speed, shorter boot time, more radio stations with better signal, switching from 3G to 4G (and the other way around) is now made simple and there are some fixes of the battery bugs.
Before Installing Android 4.0.4 On Verizon Galaxy Nexus
This is not an official update so what you will be doing isn’t supported by Google and there will be no costumer support and you warranty will be void if something goes wrong and trashes your device. While this is unlikely to happen, you should still make a back-up of all your files and contacts before moving forward. Your device must also be rooted and be running Android 4.0.2 (ICL53F). You must also have ClockWork Mod Recovery installed.
Installing Android 4.0.4 On Verizon Galaxy Nexus
So let us get started- You must download the Android 4.0.4 file [link for download] for the Verizon Galaxy Nexus and save it your computer. Rename this file (right click> rename or ctrl+R while the file is selected) to “update.zip” . Next connect your device to your computer and copy this file to the root of the SD card.
- Power your device down and enter it into Clockwork Recovery Mod.
- Perform a NANDROID backup. To do this, while in Recovery mode select the option “ backup and restore > backup ” and then transfer these files to your computer once the process is done. If you manually did a back-up already then skip this step.
- In the Recovery Mod menu choose the option “install zip from sdcard > apply /sdcard/update.zip”. The flashing process will begin shortly and last up to 5 minuets.
- Once the ROM finished with the installation/flashing process you may choose reboot system now to restart your phone normally and complete the update.
Monday, November 24, 2014
Nokia N73 Handsfree Problem
Some time ago, there was a problem that very rarely happens. Actually, if this can be called stupid. Why do I say stupid? Heres the story:
Mobile that I use the Nokia N73. When I came home from a relatives house, then I put the phone on the table. Without my knowledge, my brother took my Nokia N73. He intended to listen to music through a hands-free but without him knowing it, he took the hands-free for Sony Ericsson W395 mobile phones.
When handsfree Sony Ericsson W395 is we put on the Nokia N73, is entered. But because the system does not detect the same, finally on my phone there is always a warning enhancement not supported.
Because I do not know the chronology of the beginning, I thought it was caused by a virus that damage the operating system. I think that because I often browse and download using the phone.
When I try to restore the phone settings to factory settings, it turns out that the warning is still there. Finally, after my in-depth analysis, I have concluded that to eliminate these warnings, we must install a suitable handsfree. Finally, after I install a suitable handsfree, especially the original, mobile phones back to normal.
Subscribe to:
Posts (Atom)
